The Lawn Mowing Man

how to start your own lawn mowing business

 

LAWN MOWING TOOLS

buying, using, maintaining, repairing all types of lawn mowing tools in a lawn mowing business
Commercial 3 Wheeled Lawn Edger

The commercial 3 wheeled lawn edger is a mainstay and absolute requirement of the lawn mowing industry in Western Australia, though these machines might be rather more exotic and less frequently found or used elsewhere in Australia by its lawn mowing contractors.

The 3 wheeled lawn edger is a fantastic machine to use in our lawn mowing rounds to make lawn edges clean and crisp, at speed and with accuracy, no matter whether along hard surfaces of concrete and paving or along soft surfaces such as garden beds. While they may seem daunting to those who’ve never used them, they are useful tools and very easy to use for those of us who rely on them every day as we work.

Powered by a Honda 4HP engine, commercial lawn edgers have the power to cut through any type of thick buildup of organic material such as  heavily thatched lawns and compacted soils, the Honda engine doesn’t slow down at all under anything except the most extreme circumstances.

Tyres on older lawn edgers used to be pneumatic, which was great back in the day when we could buy good quality Australian made inner tubes. Then all of a sudden everything was being made in China and it was impossible to find a tube for an edger that actually held any air. It was an awful time when I eventually gave up and ran my edger with flat tyres because every tube I bought was defective. These days manufacturers put solid rubber wheels on their edgers, which while inferior to use compared to pneumatic tyres, they are consistently reliable over years and years, and never go flat.

Buying a lawn edger with an on/off switch at the top of the handle is a very wise choice, and as such requires the operator not to have to bend over hundreds of times per week to turn the machine on and off, this is very important and beneficial to the ongoing health of the lawn mowing contractor. If your lawn edger does not have this switch at handle height, then one can be installed.

How To Use A Commercial 3 Wheeled Lawn Edger

The best lawn edging result will come from using the lawn edger on the hardest surfaces while the blade spins on cutting the lawn edge. In this respect we would want to keep the lawn edger on any sort of paving or concrete while we cut the lawn edge, and try not to use the lawn edger while its wheels are on soft and uneven grass, unless it is absolutely necessary.

To turn the lawn edger around tighter circles and bends the operator lifts the edger up to balance it on its front wheel only while cutting around bends and then returns the edger back to all 3 wheels again when edging again becomes a straight line or even a line with a larger curve.

The edger blade should be lowered just enough into the lawn and soil so as to create a nice distinct looking finish, If we don’t cut deep enough then the finished edging won’t be as nice, and if we cut too deep then we will create a great big unnecessary mess.

The 3 wheel commercial lawn edger has a cutting height adjustment handle that gets incrementally lowered as the edger blade slowly wears down over time. The adjustments between the cutting heights on the adjuster cannot by design be suitable for every cutting depth that we might require from job to job as each blade is constantly changing lengths as it wears down.

When we can’t find the perfect cutting depth for our needs on a given job, then we choose the next height up from what we desire, and then the lawn edger is leaned over onto two wheels to find the perfect cutting height for our particular needs.

On soft garden edging we can cut a little deeper than we usually do along paths and paving, but we still don’t want to cut too deeply as there may be irrigation pipes under the soil that we definitely do not want to cut into.

Try never to point the edger at anything in front of us which is glass, it only takes a hard projectile of just 2mm to break a window of a house or car. It would be impossible to see anything that small, or bigger, as we concentrate on our work. In such circumstances we might want to use a line trimmer to edge that one section, or in some circumstances we can lift the edger up on its front wheel only, so that the guard should stop most debris from flying frontwards.

Lawn Edger Blades

Blades for commercial lawn edgers will be available for purchase at lawn mower shops. It is always cheaper to buy in bulk, the more you buy the more money you save. Plan to buy 50 to 100 at a time, or even more if you run a bigger business.

It’s important to know when to change lawn edger blades at the proper time, if we let the blade get too short then it becomes much more difficult to remove the nut that holds it in place, and we can damage and wear down the two large outer circular steel pieces which hold the blade in position when we edge with short blades.

To change the blade we should have a dedicated spanner setup always at the ready just for this purpose and no other. I use a ratchet spanner with an extension arm, this works best for me, and I keep it with my edger blades in my van.

Changing the edger blade will require putting the new edger blade horizontally between the old blade and the edger guard, this will stop it spinning around as we loosen the nut, we should then be able to use both hands to steadily remove the nut with the ratchet spanner.

Change Edger Blade

dedicated tools make the job super easy
 

If the nut is too difficult to remove, then use a small hammer for quick sudden shocks and jolts onto the spanner, this will usually and eventually undo that stuck nut. Stuck nuts most often occur from allowing the edger blade to get too short between changes.

Change Edger Blade

this blade got too short and was difficult to remove - a hammer was needed
 

To tighten the nut again, we hold the blade with one hand while tightening with the ratchet spanner with the other hand. We don’t want to over-tighten this nut !! Just tight enough that it holds and is not loose.

Maintenance Of 3 Wheeled Lawn Edgers

These are commercial machines, built like tanks, and require very little maintenance at all.

Changing the engine oil and air filters at reasonable intervals is commonsense.

Change Lawn Edger Oil

a flexible silicon funnel makes refilling the oil easy
 

If the lawn edger shuts off when edging on slight slopes, the engine needs a little more oil added.

Changing the pull cord as it begins to wear out is also commonsense.

A wash with a bucket of soapy water every so often won’t harm it.

And hosing down the wheels whenever we’ve had to cut any diseased lawns is a very good idea and is our reasonable duty of care to provide to our other customers.

How To Get Better Soft Garden Edges

Soft garden edges are often not properly taken care of by lawn mowing contractors who use 3 wheeled lawn edgers. This is usually because they will quickly go around the soft garden edges with their edging machine and do nothing else.

While the blade edging can look very neat and crisp on soft garden edges in good shape, there remains a constant problem that so many lawn mowing contractors ignore or just don’t see for themselves or from their customers perspective.

The blade edge will be crisp, but it often does nothing at all to remove any lawn runners which are creeping into the customer’s garden beds, which of course leaves lawn runners overtaking garden beds, which many customers hate, and some will change their lawn mowing man because of this.

There is a solution, and your customers will be pleased.

After cutting soft garden edges with the steel blade of a 3 wheeled lawn edger, the contractor will then gently go along the same edges with a line trimmer and cut vertically and slightly deeper with the trimmer on soft low revs. This gives the soft lawn edge a nicer and more distinct look, it maintains the crisp lines of the steel blade edging, and it can cut away many more lawn runners that are creeping into gardens.

 
Start A Lawn Mowing Business In Australia
 
how to start a lawn mowing business in australia
all articles and images are © copyright
thelawnmowingman.com
 
 

how to start a lawn mowing business in australia