The Lawn Mowing Man

how to start your own lawn mowing business

 

LAWN MOWING TOOLS

buying, using, maintaining, repairing all types of lawn mowing tools in a lawn mowing business

These might be some helpful tips for other lawn mowing contractors who are new to the game, or those just starting out, or those who are just now researching a possible entry into the lawn mowing industry, and maybe even a longer term lawn mowing contractor might see some new idea that might be able to used by them.

These are my tips for the Honda HRU216 lawn mower for commercial users.

Increase Revs

For some reason the engine on the Honda does not produce enough power out of the box, the revs need to be increased to make the lawn mower suitable for contractors use. Ask the mechanic to do this for you at the shop you buy it from. There are instructions on Youtube, but the ones I found were not quite right and resulted in the loss of the choke. Be careful of whose tips you follow.

The Handy Stick

I have a stick, which is a piece of bamboo that I had laying around, I covered it in some cloth tape, and now I use it almost every day. It is placed across the handles and is used to keep the rear chute flap of lawn mowers up. This allows me to go up and down steps without the rear chute flap getting in the way and stopping it from happening. It also helps when I change the blades on other brands of lawn mowers.

Stick Holds Rear Mower Flap Up

a bamboo stick covered in green tape - is used almost every day
 

Going Up And Down Steps

The stick holds the rear chute flap in place so that the lawn mower can go up and down steps. In such events the catcher will sit nicely on top of the lawn mower as it rests on the handles and on the raised rear chute flap of the mower.

Remove The Rear Rubber Flap

I know this is meant to be a protective device, however in this age of lawn disease spreading everywhere from Sir Walter lawns, we must do everything we possibly can to stop this spread ourselves. A lot of this comes down to having separate lawn mowers, washing lawn mowers, and isolating clean and diseased lawns. However one little extra thing we can do is to remove this big rubber flap that scrapes across the top of all lawns that we service, which then makes this flap a huge contributor which can increase the spread of lawn disease. Two bolts will remove the rear rubber flap.

Remove Mower Rubber Flap

this handy invention could easily inadvertently spread lawn disease if we're not careful
 

WD40 Bolts And Screws

If you’re regularly washing lawn mowers, then there is a high chance that bolts and screws can become seized into place, which can break bolts and screws when we try to remove them. If we must remove them at any time from around the deck of the lawn mower for any reason, then it is a good idea to use water dispersement spray WD40 to help keep the bolts and screws more resistant to water damage.

Colour Coding Lawn Mowers

If you run multiple HRU216s then it can be a good idea to colour code the lawn mowers so they can be quickly identified for their different uses. Coloured cloth tape on top of the handles works for me, I also put the same tape on catchers and mulch plugs. I differentiate my lawn mowers for diseased and non-diseased lawns, red tape for diseased lawns, green tape for non-diseased lawns.

Color Code Lawn Mowers

green tape means this mower is used on clean non-diseased lawns
 

Lawn Mower Blade Change

I like to remove the blade carrier in order to change my mower blades, this can’t be done easily on all lawn mowers but it is easy enough to do on the Honda HRU216, that’s how I change my blades, though others might change them with the carrier still attached to the lawn mower.

Lawn Mower Blades

The Honda HRU216 runs with 2 x low lift blades and 2 x high lift blades as standard. Some lawn mowing contractors will use 4 x high lift blades in the Winter months as this helps the lawn mower to catch more clippings without clogging the rear chute as frequently when the grass is wet. Some lawn mowing contractors like to run 4 x high lift blades all year round as preventative to the rear chute blocking and for better catching.

Lawn mower blades can be purchased in packs of 2 x low lift blades and 2 x high lift blades from Honda and aftermarket manufacturers. Blades can also be purchased in bulk from some lawn mower shops, some shops might only stock high lift blades in bulk, while other shops might stock high and low lift blades for bulk purchase. Blades can also be ordered online at good prices.

The bolt assembly is something that all lawn mowing contractors should be aware of and make a conscious decision about how they will manage this aspect of blade changes if they buy their lawn mower blades in bulk. Some contractors are fine using the same bolts over and over again, while others prefer to change their bolts at every blade change. The little spring-type washers that hold the blades rigidly will get flattened out on use and may need to be reshaped to make them springy again so that they will hold blades rigid at the next blade change. The individual lawn mowing contractor’s thoughts on safety is the deciding factor of whether they will choose to change bolts with every blade change.

Some lawn mower shops will sell the bulk blade bolt assemblies with the bulk blades and others won’t. Depending on the lawn mower shop used, the bulk price of buying blades and bolt assemblies can be higher than buying just the packs with the 4 blades and bolts contained.

Wheel Ratchets And Self Drive Wheel Parts

If the lawn mower is not self propelling properly, if the mower seems like it is hard to get going or that it veers towards one side, then a wheel ratchet might be broken. These are easily replaced in a minute by removing the affected rear wheel and removing and replacing the wheel ratchet, then putting the wheel back on.

Honda Mower Wheel Ratchet

wheel ratchet is wet and rusty and will soon break - caused by frequently washing mowers
 

Wheel ratchets come in left and right variants, if the little arms that stick out are pointing right, then the ratchet goes on the right wheel; and vice versa for the left side too.

Other parts which can break inside the wheel assemblies will be the dust cover becoming rusted and broken and the wheel pin seizing into place and/or snapping. If the wheel pin seizes into position then it will need to be hammered out.

If the wheel ratchet or dust cover won’t slide into place, then use a file on the axle to remove any rust and scale buildup so that these parts can slide on and off with ease.

The more often we wash our Honda lawn mowers, the more often these wheel parts will break and need replacing. Aftermarket suppliers can provide the parts at discounted prices.

Clicking Gearbox Or Drive Problems On Honda HRU216

If the gearbox is clicking on your Honda lawn mower, then it is almost always a clutch cable issue. The clutch cable for the self propelled drive of the lawn mower is no longer engaging the drive on the gearbox, and so the gearbox starts making clicking noises.

The reason why the clutch cable is not engaging the gearbox can be due to a slight adjustment being needed to its adjustment nuts, or the clutch cable has stretched, or the gearbox arm may have lost its shape.

Honda Mower Drive Adjustment

the middle cable is for the self propelled drive clutch cable
 

Making an adjustment to the adjustment nuts at the control box at the top of the handles is our first response to a clicking or stalling gearbox drive. Once we run out of adjustment room with those nuts then we need to replace the clutch cable. The gearbox cable and adjustment nuts will be the middle cable in the control box.

Honda Mower Clutch Cable

the Honda HRU216 clutch cable
 

Replacing the clutch cable is super easy and should not be feared, there are instructions on Youtube that show how it’s done, and once you’ve done it once you can do it again in just a few minutes.

Honda Mower Clutch Cable

the new clutch cable attaches to the arm on the gearbox
 

There is also an arm attached to the gearbox, to which the cable is attached, that can become misshaped with use, and these too will need to be replaced occasionally. Some lawn mowing shops and mechanics and lawn mowing contractors choose to replace the arm at the same time as the clutch cable, so that both remain functional and reliable at all times. Replacing the arm on the gearbox of a HRU216 is more time consuming and the new arm needs to be precisely positioned into the exact spot as the last arm was in order for the gearbox drive to function at all, and maybe even so that the clutch cable can even be attached to the new arm if it is positioned incorrectly.

 
Start A Lawn Mowing Business In Australia
 
how to start a lawn mowing business in australia
all articles and images are © copyright
thelawnmowingman.com
 
 

how to start a lawn mowing business in australia